Go
a chapter of
Association of Pool & Spa Professionals

Association of Pool & Spa Professionals
The Pool & Spa Show Codes & Regs Buyers & Owners

Approved Drain Covers & Safety Vacuum Release Systems

Manufacturers of ASME/ANSI A112.19.8-2007 Approved Drain Covers 

The following companies, listed alphabetically, manufacture pool and spa drain covers of various sizes and have represented to CPSC staff that their covers meet the ASME/ANSI A112.19.8-2007 standard, as required by the Virginia Graeme Baker Pool and Spa Safety Act, Section 1404(c)(1)(A)(i).

The CPSC is providing this information as a convenience to pool owners and operators. The CPSC does not provide approval or endorsements for any of these companies or their products. Other companies not listed may also manufacture products that meet the requirements of the law.

Last updated 2/03/2009 
A&A Manufacturing 
Division of Shasta 
Industries Inc.
3750 West Indian School Road
Phoenix, AZ 85019
Tel (800) 851-8492
Fax (602) 5324896
Michael Marshall
Michael.Marshall@aamfg.com
www.UnblockableDrain.com
Afras Industries Inc. 
766 Hampshire Road, 
Unit A
Westlake Village, CA 91361
Reza Afshar
Tel: (805) 230-0011
Fax: (805) 230-0062 
www.afrasinc.com
AquaStar Pool Products Inc.
1666 Garnet Ave #224
San Diego, CA 92109
Wade Arens
Tel (877) 768-2717 ext 2
Fax (877) 276-POOL
wade@aquastarpoolproducts.com
www.aquastarpoolproducts.com
BALBOA Water Group
1382 Bell Ave 
Tustin, CA 92780
Bob Spillar 
Tel: (714) 955-6240 
Fax: (714) 384-0335
Bob.Spillar@BalboaWater.com
www.BalboaWater.com

Color Match Pool Fittings
15754 W. Christy Dr.
Surprise, AZ 85379
Todd Krombein
Tel: (623)337-4120
Fax: (623)337-4126
todd@poolfittings.com
sales@poolfittings.com
www.poolfittings.com

Current Systems Inc.
Peter Davidson
Riverflow Pumps
621 Via Alondra Ste. 607
Camarillo, CA 93012
Tel. in Calif. Tel: (805) 482-1091
Tel. in Florida: (888) 442-4113
Fax: (805) 482-1041
pdavidson@current-systems.com
Drain Safe/New Water Solutions
Ron Schroader
Lake Worth, FL
Tel (561) 433-2580
Ron@drainsafe.com
www.drainsafe.com
Eureka Manufacturing Co.
PO Box 1473
Bismarck, ND 58502
Cathryn Binstock
Tel: (701) 223-7932
Fax: (701) 258-5423
cathryn@eurekamanufacturing.com
www.eurekamanufacturing.com
Hayward Pool Products
61 White Cap Drive
North Kingstown, RI 02852
Joe DiOrio, Product Manager
Tel (401) 583-1107
Fax (401)583-1407
jdiorio@haywardnet.com
www.haywardnet.com/safety1
Lawson Aquatics, Inc.
4431 Corporate Square
Naples, FL 34104
Bob Fink, Product Manager
Tel: (800) 897-6160 Tel: (239) 435-3700
Fax: (239) 435-3708
/www.lawsonaquatics.com
Paddock Industries Inc.
555 Paddock Parkway
Rock Hill, SC 29730
Mike Schuett, Executive Vice President
Tel (800) 849-2729
www.paddockindustries.com
Paramount Pool and Spa Systems
295 E. Corporate Place, Ste. 100
Chandler, AZ 85225
Dominic Conn, Director of Engineering
Tel (480) 893-7607
DCONN@1paramount.com
www.1paramount.com
San Antonio Gary Equipment 
Company Inc.
438 Sandau Road
San Antonio, TX 78216-3621
Tassie Zars
Tel 210.341.5255
Fax 210.341.5154
retro@garypools.com
www.GaryEquipment.com
Triodyne Safety Systems LLC.
3054 N. Lake Terrace
Glenview, Illinois 60025
Tel: (847) 486-9640
Fax: (847) 486-9645
Pete Warner
petew@triodyne.com
www.antihairsnare.com
Waterway Plastics
2200 E. Sturgis Rd.
Oxnard, CA. 93030
Ray Mirzaei, Certified Engineer
Tel (805) 981-0262
waterway@waterwayplastics.com
www.waterwayplastics.com
World Wide Sports LLC
112 South Hanley Road
Suite 101
St. Louis, MO 63015-3418
Harry Newhart
Tel (314) 863-0040
www.worldwidesportsllc.com

Manufacturers of ASME/ANSI A112.19.17 or ASTM F2387 Approved 
Safety Vacuum Release Systems

The following companies, listed alphabetically, manufacture safety vacuum release systems and have represented to CPSC staff that their systems meet the ASME/ANSI A112.19.17 or ASTM F2387 standards, as required by the Virginia Graeme Baker Pool and Spa Safety Act, Section 1404(c)(1)(A)(I).

The staff is providing this information as a convenience to pool owners and operators. The CPSC does not provide approval or endorsements for any of these companies or their products. Other companies not listed may also manufacture products that meet the requirements of the law.

Last updated 2/13/2009

A.O. Smith EPC
531 North Fourth Street
Tipp City, OH 45371
www.aosepc.com/Products/eMod
[Note: eMod model also qualifies as an automatic pump shut off system.] 
Midwest and Northeast
Greg Fritz
Tel (937) 609.6342
A.O. Smith EPC
531 North Fourth Street
Tipp City, OH 45371
www.aosepc.com/Products/eMod

Florida / Southeast
John Alexander
Tel (813) 335.0879

West
Bill DeCorrevont
Tel (602) 300.4664

Hayward Pool Products 
61 White Cap Drive
North Kingstown, RI 0401) 583-1107
Fax (401)583-1407
jdiorio@haywardnet.com
www.haywardnet.com/safety1
Pentair Water Pool and Spa
1620 Hawkins Avenue
Sanford, NC 27330
Customer Service: 
800-831-7133
Customer Service Fax: 
919-566-8926
Technical Service: 
800-831-7133
Steve.Barnes@PentairWater.com
www.PentairPool.com
Stingl Products LLC
Sterling, VA
Tony Sirianni
Tel (888) 749.5433
Tel (571) 434-6010
Fax (571) 434.6013
tonysirianni@stinglproducts.com
www.stinglproducts.com
Vac-Alert™ Industries LLC
Santa Rosa, CA 95401
Paul Pennington
Tel (800) 374-7405
Fax (707) 576-8286
paul@vac-alert.com
www.vac-alert.com
Vacless™ Systems Inc. Pool and Spa Safety Products
Simi Valley, CA 93063
John Steffen
Tel (877) 822-5377
Tel (818) 899-1700
Fax (818) 899-1744
john@vacless.com
www.vacless.com
Emotron Inc.
1005 N. Holland Sylvania Rd.Toledo, OH 43615Paul Hackett
Tel: (419) 842-2233
Fax: (419) 866-1506
paul.hackett@usa-emotron.comwww.usa-emotron.com
 

For more information on the following products visit the websites listed above, and for more information on entrapment code call NESPA (609)689-9111
Please note: This release is for informational purposes only. NESPA does not endorse any of the products listed.
Copyright 2017 by NESPA
Scroll Up